English
عربى
The vibrator is small in size and light in weight. It is simple, convenient, fast, time-saving and labor-saving to use and install. The plasticity is increased, the component density is increased by 30-45%, and the forming speed is fast. Due to the high vibration frequency and small amplitude, it deforms in the steel template The upper energy consumption is small, so the template welding and maintenance are reduced and the service life of the template is extended.
The vibrator adopts a quick assembly and unloading structure. Only one screw can be fixed on the template. It takes about 25-40 seconds to install and unload one unit, which saves 80% of the time and 70% of manpower compared with the installation speed of ordinary attached vibrators. The service life of this vibrator is more than 4 times that of ordinary vibrators. Due to the high efficiency of the high-frequency vibrator, each vibration time is only 25-60 seconds, which improves the service life of the high-frequency vibrator and reduces the number of maintenance. , Reduce costs and improve production efficiency.
Due to the variety of vibrator products, the selection is relatively complicated. In fact, vibrators can be divided into two main categories, one is rotary centrifugal vibrators, and the other is linear pneumatic vibrators. Relatively speaking, because the vibrator moves in a straight line, the vibration force loss is relatively small, and the air consumption is relatively small.
Vibrators are mainly divided into steel ball type, turbine type, and roller type. These three models have their own characteristics. The steel ball type is cheap, the turbine type is of better quality, and the roller type has greater vibration force. Compared with the linear vibrator, the rotary centrifugal vibrator consumes more air, and the actual centrifugal force generated is actually greater, but because it is the rotary centrifugal force, it may feel as if the force is not as large as the linear vibrator.
